Difference between revisions of "Support:Tech notes"

From COMKAT wiki
Jump to navigation Jump to search
Line 59: Line 59:
  
 
== How to prepare a COMKAT release ==
 
== How to prepare a COMKAT release ==
 +
 +
== CCIR-specific settings for MATLAB distributed computing server ==
 +
 +
As the server is installed on the 123 subnets, clients on the 125 subnets will not be able to connect to the job manager unless the following modification is made:
 +
 +
1. On the client side, edit the file 'hosts' and add a line
 +
 +
<THE SERVER IP ADDRESS> <SERVER NAME>
 +
 +
such as:
 +
 +
123.456.78.9 HEADNODE
 +
 +
Contact Dean or Dr. Muzic to get the right information.
 +
 +
The 'hosts' file can be found at '/etc/' in Macs and '/Windows/System32/drivers/etc/' in Windows-based PCs.
 +
 +
2. On the server side, edit the 'hosts' file. Do the same thing to add the ip and computer name of the client to this file.
 +
 +
3. Now the findResource command should work without any problem.

Revision as of 21:11, 30 July 2008

Mex and compiler setting

How to set up mex compiler on a 64-bit Matlab using Visual Studio 2008 Professional

  1. I was using Visual Studio 2008 Profession that is free for college students. I believe 2008 Express works the same way, too.
  2. When you install Visual Studio 2008, I recommend to install 'Full' so that you are sure the 64-bit compilers and libraries are installed.
  3. Go to http://www.mathworks.com/matlabcentral/fileexchange/loadFile.do?objectId=18508&objectType=file. Download, uncompress and copy the x64 mex option files under the MATLABROOT\bin\win64\mexopts.
  4. Do a mex -setup. Let Matlab locate the installed compiler. Select "Microsoft Visual C++ 2008".
  5. Use mex command to compile a simple file. You get the following error
C:\PROGRA~1\MATLAB\R2007B\BIN\MEX.PL:  
Error: Using options file: 
         C:\Users\deancool\AppData\Roaming\MathWorks\MATLAB\R2007b\mexopts.bat 
         You cannot use this file with the WIN64 architecture because it enables 
         a compiler for a different architecture. 
         Running mex -setup may resolve this problem. 

To fix this error:

  1. Locate your mexopts.bat file. Edit the following lines:
    1. Line 17 (set PATH): add '\amd64' after set PATH=%VCINSTALLDIR%\BIN\
    2. Line 19 (set LIB): add '\amd64' after set LIB=%VCINSTALLDIR%\ATLMFC\LIB and %VCINSTALLDIR%\LIB. Add '\x64' after C:\Program Files\Microsoft SDKs\Windows\v6.0A\lib
    3. Line 20: set MW_TARGET_ARCH=win64
    4. Line 34: set LIBLOC=%MATLAB%\extern\lib\win64\microsoft
    5. Line 36: /MACHINE:X64

NOTE: Environment - Windows Vista 64-bit, Matlab 2007b 64-bit. My mexopts.bat file: File:Mexopts.zip

How to set up the C compiler from Visual Studio 2008 on a 64-bit Windows system

  1. Go to control->system->environmental variables. Edit 'path' and add the following dir: C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\amd64
  2. Go to control->system->environmental variables. Edit 'LIB' and add the following dir: C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\lib\amd64

Or go to C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\bin\amd64 and run vcvarsamd64.bat

How to set up mex compiler on a 64-bit Matlab using MinGW

How to set up the C compiler from MinGW on a 64-bit Windows system

How to compile cvOdesGenMod5.c

Windows

1. Enter COMKATROOT\CVODESserial-2.3.0-2005\sundials\cvodes\source. Run:

cl /c /I..\include /I..\..\shared\include *.c
lib /out:cvodes.lib *.obj

Copy cvodes.lib to the COMKATROOT\lib\win64 folder (change win64 according to your system) 2. Enter COMKATROOT\CVODESserial-2.3.0-2005\sundials\shared\source. Run:

cl /c /I..\include  *.c
lib /out:sundials.lib *.obj

Copy sundials.lib to the COMKATROOT\lib\win64 folder (change win64 according to your system) 3. Enter COMKATROOT\CVODESserial-2.3.0-2005\sundials\nvec_ser. Run

cl /c /I..\shared\include  *.c
lib /out:nvec_ser.lib *.obj

Copy nvec_ser.lib to the COMKATROOT\lib\win64 folder (change win64 according to your system)


Linux

NOTE: Under 64-bit Ubuntu and 64-bit Matlab, you have to do the following changes to make the mex compilation work. 1. Edit the mexopts.sh and remove all -lstdc++ 2. Edit the cvodesGenmod5.c. Find function 'clear' and remove the 'static' declaration. 3. When you use gcc to compile, add a flag '-fPIC'.

How to prepare a COMKAT release

CCIR-specific settings for MATLAB distributed computing server

As the server is installed on the 123 subnets, clients on the 125 subnets will not be able to connect to the job manager unless the following modification is made:

1. On the client side, edit the file 'hosts' and add a line

<THE SERVER IP ADDRESS> <SERVER NAME>

such as:

123.456.78.9 HEADNODE

Contact Dean or Dr. Muzic to get the right information.

The 'hosts' file can be found at '/etc/' in Macs and '/Windows/System32/drivers/etc/' in Windows-based PCs.

2. On the server side, edit the 'hosts' file. Do the same thing to add the ip and computer name of the client to this file.

3. Now the findResource command should work without any problem.